Overview
Prepare your enquiry
The DS-2FA1225-C4 accepts 150 to 285 V AC at 47–63 Hz. Normal output is 12 V DC with a maximum current of 1 A per channel. It provides overcurrent, short-circuit and overvoltage protection. DC outputs use a terminal block in a 144 × 80 × 33 mm housing.
A precise reference and a clear requirement help our team check your selection.
- Include quantities and the intended use.
- Describe existing equipment and interfaces to check.
- Specify the documents or technical details your project requires.
Applications
Check total load, each camera’s current and cable lengths. The 13.5 V and 15 V compensation settings must suit the voltage accepted by the connected equipment. List each device’s demand and simultaneous load before selecting the supply. Check the documented voltage, polarity, per-output limits and total capacity; plan cable runs and circuit protection, then verify voltage at the point of use.
↗
↗
↗
↗